Edward B.

When it comes to illuminating outdoor spaces, incorporating lighting fixtures onto trees can add a touch of magic to any landscape. The tree mount accessory serves as an ingenious solution, allowin...

Lens Accessories: Frosted, red, blue, green and amber lens accessories are used to alter the spectrum and distribution of the light coming out of the fixture. Installation: Place the lens in betw...

Low Voltage Cable LengthIn planning a low voltage system, it is necessary to consider the impact of voltage drop. Because of cable’s inherent resistance, voltage drops along its length: the end-of-...

Note: Ensure safety precautions are followed, and the fixture is powered off during adjustment. Identify Beam Angles: Locate the beam angle changing dial on the fixture. Note the four pre-determ...

Please visit our Warranty section of our website. 

Light Engine can be taken out remotely by disconnecting the Quick Connector. Unscrew Face Plate Screws with hex L-key. Take out the Face Plate, Gasket, and accessory lens (if any). Pull the Ligh...

Introduction:  AURORA Landscape Color Changing LED is a high-performance Landscape Lighting fixture utilizing a wired DMX 512 open standard topology that provides seamless and reliable integration ...

Method 1: RDM Tool Utilizing an RDM tool such as the Swisson-XMT, the devices may be assigned a starting address.  DMX Channels:  CH1: Dimming - The module or the group can be dimmed from 100–1%...

We recommend using the following spacing criteria for step lights. These criteria can be used for indoor or outdoor installations.    Related Links:  Exterior Step Light Catalog How far apart shoul...

We recommend using the following spacing criteria for step lights. These criteria can be used for indoor or outdoor installations.    Related Links:  Step Light Catalog   Spacing Recommendations fo...